Not Included: PIR Motion Sensor
This is an enclosure for the PIR Motion Sensor (SKU: ACCY-MS-WDANG).
The enclosure is designed to be mounted on its bottom side or on its backside with #6 screws (not included). The lid snaps into place and is held by friction if the unit is mounted on its bottom side, though something could be placed through the backside mounting holes to hold it in place if necessary. When mounting the unit on its backside the lid is held in place by the backside mounting tabs and pressure.
It has mounting posts inside the enclosure that are designed to be melted to hold the PIR module in place. The posts can be melted using a soldering iron, wood burner, or other hot metal devices (such as a heated-up screwdriver tip) - Obligatory Warning: Make sure to do this in a well-ventilated area to avoid inhaling whatever toxic fumes may be produced when melting the posts.
Three tubes are provide (10mm, 15mm, and 20mm) that can be glued to the front, around the dome, to help limit the motion sensors’ field of view.
